Operator Terminal System Manual - 11276916.pdf

Alarm library
[ALARMS]
System Manual – DOP11A Operator Terminals
Network Functions and Communication
Network functions in the terminal
This library is only shown if alarms have been defined in the terminal and the terminal is
in run mode. In this library, the alarm groups are displayed as SKV files with a length of
0. This does not necessarily mean that there are no alarms. They are read-only files.
File format Each alarm is stored in a line ending with a carriage return and a line feed: [carriage
return][line feed].
HTML library
[HTML]
Syntax (DOP11A-40 and DOP11A-50)
A semicolon (;) is used as separator.
Status;Activation date;Activation time;Deactivation date;Deactivation time;Acknowledgement
date;Acknowledgement time;Alarm text
All fields are always available. The date and time fields of unacknowledged alarms are
empty.
Syntax (other terminals):
Status;Activation date;Activation time;Alarm text
The file is completed with "END" [carriage return] [line feed].
This library contains files that are managed by the web server. You can create sublibraries.
The start file (HTML page shown as start page in the web browser) must
always have the name index.htm.
File format The file name depends on the file type. Standard file formats such as HTML are used.
Recipe library
[RECIPE]
The individual recipes in the respective recipe libraries are displayed as SKV files with
a length of 0. This does not mean the recipe is empty. Read and write access is possible
on files in this library.
9
239