Operator Terminal System Manual - 11276916.pdf

I
8 Macros
0
Insert event / Add event
Unit Functions
Clicking on the [Insert event/Add event] button opens the following selection dialog:
10789AEN
Each macro can include a maximum of eight different events (lines).
Parameter Description
I/O With this parameter you define the signal to be linked with an event in the macro. In
the [Choose event], field you select the event to be linked with the signal in the macro.
You can choose from the following events:
Set The digital signal is activated when the macro key is pressed
and remains in this state.
Grouped Signals that are linked to a function key with the current group
number are reset.
The group number is entered in the [Group no.] field.
A group comprises a maximum of eight functions.
Dec. analog Activating the macro by pressing a key will decrement the
analog signal by the value defined in the [value] field.
Reset The digital signal is deactivated when the macro key is
pressed and remains in this state.
Set analog Activating the macro by pressing a key will assign the value
defined in the [value] field to the analog signal.
Toggle The digital signal is activated and deactivated alternately
when pressing the macro key.
Inc. analog Activating the macro by pressing a key will increment the
analog signal by the value defined in the [value] field.
Jump to block Enter the number or name of the block you want to jump to when pressing the macro
key.
A block jump can only be the last event in a macro because it completes the macro.
218 System Manual – DOP11A Operator Terminals