Operator Terminal System Manual - 11276916.pdf
Operator Terminal System Manual - 11276916.pdf
Operator Terminal System Manual - 11276916.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The control block looks as follows:<br />
<strong>Terminal</strong><br />
Recipe file 1<br />
Register<br />
n<br />
n+1<br />
n+2<br />
-<br />
-<br />
-<br />
n+m<br />
Register<br />
n<br />
n+1<br />
n+2<br />
-<br />
-<br />
-<br />
n+m<br />
123<br />
53447<br />
0<br />
76789<br />
Recipe file x<br />
89<br />
7699<br />
1<br />
76789<br />
Value<br />
Value<br />
<strong>System</strong> <strong>Manual</strong> – DOP11A <strong>Operator</strong> <strong>Terminal</strong>s<br />
Save recipe<br />
Receive recipe<br />
Delete recipe<br />
Name of recipe files<br />
Recipe<br />
register<br />
Control<br />
block<br />
Unit Functions<br />
Recipe management<br />
Register<br />
0<br />
1<br />
-<br />
-<br />
-<br />
Controller<br />
54249AEN<br />
You can define the first register in the control block under [Setup] / [Recipe settings].<br />
This register as well as the seven subsequent registers are used as control registers.<br />
The control block is described in the following table.<br />
Register Content Description<br />
Ctrl. reg. 0 Command The command register is defined by the controller.<br />
Available commands:<br />
0. No command<br />
1. Save recipe in the terminal<br />
2. Recipe received by terminal<br />
3. Delete recipe in the terminal<br />
4. Create recipe directory<br />
5. Change recipe directory<br />
6. Delete recipe directory<br />
Ctrl. reg. 1 Result code Handshake register defined by the terminal<br />
0. Ready for new command<br />
1. OK<br />
2. Write error in the recipe file<br />
3. Recipe file does not exist.<br />
Ctrl. reg. 2 File name characters<br />
1-2<br />
Ctrl. reg. 3 File name characters<br />
3-4<br />
Name of the recipe file or recipe directory in the terminal.<br />
Ctrl. reg. 4 File name characters<br />
5-7<br />
Ctrl. reg. 5 File name characters<br />
7-8<br />
Ctrl. reg. 6 Start data register First data register that is loaded from the recipe file or is to<br />
be saved in the recipe file.<br />
Ctrl. reg. 7 Number of registers Number of registers to be loaded from the recipe file or to<br />
be saved in the recipe file.<br />
n<br />
n+1<br />
Value<br />
123<br />
53447<br />
n+2 0<br />
-<br />
-<br />
n+m 265346<br />
-<br />
-<br />
Ctrl. reg. 0<br />
Ctrl. reg. 1<br />
Ctrl. reg. 7<br />
data<br />
control<br />
Program in the<br />
controller<br />
I<br />
0<br />
8<br />
195
Change language