Operator Terminal System Manual - 11276916.pdf

System Manual – DOP11A Operator Terminals
Programming
Programming with the programming software
Figure 34: Downloading a driver from the Internet
The list shows the version numbers of available and already installed drivers. Select the
driver(s) to be installed in the HMI-Builder. The function [Mark newer] highlights all
drivers of a higher version that are not installed. Next, click [Download]. Each driver file
size is about 500 kB and is ready to use directly after download.
From disk To update available drivers to the latest version or to install a new driver, select [File] /
[Update terminal driver] / [from disk]. Close all projects before you use this function.
Open the MPD file in the driver directory. A list opens with all drivers that can be
installed.
The list shows the version numbers of available and already installed drivers. Select the
driver(s) to be installed in the HMI-Builder. The [Select as new] function highlights all
drivers that are available in a later version or that are not installed. Next, click [Download].
Each driver file size is about 500 kB and is ready to use directly after download.
I
0
10407AEN
7
71