Operator Terminal System Manual - 11276916.pdf

System Manual – DOP11A Operator Terminals
Programming
Communication with MOVIDRIVE® and MOVITRAC® 07
Note the minimum and maximum input values.
10787AEN
4. Now define another Analog numeric object to display the actual speed. Link this
object with parameter P000 and enter the necessary scaling (0.001 in the example).
Index register l1 is then treated like a preset RS-485 address: I1:P000.
This means the inverter address that corresponds with the content of index register
l1 will be addressed.
Enter a gain of 0.001 to display the unit of actual speed in [1/min].
10788AEN
I
0
7
67