Operator Terminal System Manual - 11276916.pdf

[General] tab
[Curves] tab
System Manual – DOP11A Operator Terminals
Programming
Graphic display and control
Parameter Description
Scale division Interval between the scale marks on the y or x axis.
Scale ticks Interval between the displayed scale ticks on the y or x axis.
Minimum value Minimimum value for the y or x coordinate.
Maximum value Maximum value for the y or x coordinate.
Border style Specify whether you want the object to appear with a border.
Grid Select this checkbox to show the grid in the diagram.
BG Define a background color for the object.
Scale Define a color for the scale in the diagram.
Grid Define a color for the grid in the diagram.
10639AEN
Parameters Description
Graph name Enter a name for the respective curve.
X analog signal Data register that contains the first x-coordinate for the corresponding
curve.
Y analog signal Data register that contains the first y-coordinate for the corresponding
curve.
Register pair count Number of register pairs to be drawn (as points or bar).
Value form Specify whether you want the diagram to appear as bar or line diagram.
In a bar diagram, a bar is drawn for each register pair. In a line diagram,
the x / y coordinates are displayed as points connected with a line.
Curve Define a color for the corresponding curve.
Thickness Specify the line thickness for the curve.
Only one curve can be defined in the DOP11A-20 terminal. DOP11A-30, DOP11A-40
and DOP11A-50 terminals allow for defining two curves.
I
0
7
135