Operator Terminal System Manual - 11276916.pdf

Alarm banner Object used for displaying a line from the alarm list.
[General] tab
System Manual – DOP11A Operator Terminals
Programming
Graphic display and control
10646AEN
Parameters Description
List line number Enter the line number in the alarm list from which you want to retrieve
information (1=first line, 2=second line, etc.) when the specified alarm
group is shown in the alarm list.
Positions Number of positions to be displayed.
Alarm group Specify the alarm group you want to display. The object is shown in the
color defined for the alarm group.
Show day of the
week
Select whether you want the day of the week to be displayed.
Show date Select whether you want the date to be displayed.
Show time Select whether you want the time to be displayed.
Show symbol Select whether you want alarm symbols to be displayed.
See chapter 8.2 Alarm handling".
Show active alarms Specify whether only active alarms are to be displayed. The alarm banner
only
object remains empty if no active alarm was triggered.
Show repeat count Indicates how often the alarm was repeated.
See chapter 8.2 "Alarm handling".
Border style Specify whether you want the object to appear with a border.
BG Define a background color for the object.
For acknowledging an alarm in the alarm banner, you have to activate the [Enable
acknowledge] checkbox on the [Access] tab.
I
0
7
143