Operator Terminal System Manual - 11276916.pdf

I
Programming
7 Programming with the programming software
0
I/O change The [I/O change] enables you to change I/Os or move an entire I/O range. I/O changes
can be made for the entire project or only for selected objects.
The function can be used in the following areas:
Blocks in the block list
Objects in graphic and text blocks
Lines in the alarm list
Lines in the function key manager
Lines in the LED manager
Lines in the cross reference list
Select [Edit] / [I/O change] from the menu.
Figure 47: I/O change
10422AEN
Parameter Description
Change I/O in Define whether I/Os are to be changed in the entire project or for selected objects.
Change Select whether an individual I/O is to be changed or an entire I/O area is to be moved.
From I/O, end
I/O, to I/O
Enter the I/O to be changed and define the area to which you want to move the I/Os.
Confirm each
change
Enable this checkbox if you want to confirm each I/O change for an object.
94 System Manual – DOP11A Operator Terminals