Operator Terminal System Manual - 11276916.pdf

I
Operation and Service
6 Project transfer with PC and HMI-Builder
0
If a project is transferred to the terminal for the first time, the transfer will take place via
serial connection and the PCS11A programming cable.
10379AEN
5. The project can now be transferred to the terminal with the selection field [Transfer]
/ [Project].
The following functions are active as standard and must remain in this setting.
Test project on send
Send complete project
Automatic terminal RUN/TRANSFER switching
Check terminal version
Download of files takes place after activation of [Send] button.
46 System Manual – DOP11A Operator Terminals