Operator Terminal System Manual - 11276916.pdf

System Manual – DOP11A Operator Terminals
Programming
Expansion cards for ETHERNET and PROFIBUS-DP
2. Select [TCP/IP Connection 1]. Right-click and select [Properties] to open the dialog
for making the TCP/IP network settings.
10778AEN
In the dialog, type the connection and define IP address and subnet mask.
Parameter Description
Connection name Type a name for the connection. This parameter is optional.
Host configuration If [Manual] is selected, the settings specified in the TCP/IP setting dialog will be
used. All other options are used when a server assigns one or several TCP/IP
parameters to the terminal.
IP address and Enter the network ID for the node. The network connection takes place accord-
subnet mask ing to ETHERNET standard. IP addresses in the range of 192.168.1.1 and
192.168.1.254 are recommended for a local network that only consists of terminals.
Gateway Enter the network unit in the local network that is capable of identifying the other
networks in the Internet.
Primary DNS and Enter the server(s) that include information on part of the DNS database.
secondary DNS
3. Finally, click [OK] to confirm your settings.
I
0
7
173