Operator Terminal System Manual - 11276916.pdf

System Manual – DOP11A Operator Terminals
Programming
Transferring projects
TCP/IP transfer Not applicable for DOP11A-10.
To transfer a project via TCP/IP, select the [Use TCP/IP transfer] option from the [Transfer]
/ [Communication parameters] menu. Clicking the [Send] button in the [Project
Transfer] dialog opens the following window:
10705AEN
Parameter Description
Host address The IP address for the target terminal is entered in this field.
Terminal control port Specifies the TCP/IP port number for the changeover from RUN to
transfer mode. This value usually need not be changed. The default
setting is 6001.
Transfer port Specifies the TCP/IP port number for the transfer (project transfer
server). This value usually need not be changed. The default setting
is 6000.
User ID Type the user name that is used when checking the changeover
from RUN to transfer mode. The user ID is not required when the
terminal is already in transfer mode.
Password Type the password that is used when checking the changeover from
RUN to transfer mode. The password is not required when the terminal
is already in transfer mode.
Save password in Select this checkbox if you want to save your password and user ID.
project
You will then not be prompted for them anymore.
Serial transfer For serial transfer, select the [Use serial transfer] option under [Transfer] / [Comm.
settings]. To transfer the project to the terminal, click the [Send] button in the [Project
Transfer] dialog.
Modem transfer For transfer via modem, select the [Use modem transfer] under [Transfer] / [Comm.
settings]. To transfer the project to the terminal, click the [Send] button in the [Project
Transfer] dialog.
I
0
7
167