City of Frisco Engineering Standards

foundation location is satisfactory. The Contractor shall be liable for all damages done, and
restoration to utilities as a result of their operations.
D. Contractor shall contact the City for inspection prior to pouring any concrete foundation and
digging for conduit runs at least 48 hours in advance (between 8 am – 5pm).
E. No poles shall be placed on foundations prior to 7 days following pouring of concrete.
F. Contractor shall clean up and remove all loose material resulting from construction
operations.
G. Top of foundation shall be 3 inches above the finished grade unless otherwise shown on the
plans and shall be formed or provided a smooth finish satisfactory to the City. Foundation
piers shall be drilled plum, the top of foundation poured level, and the top 3 inches of the
exposed foundation above finished grade shall have the sonotube removed.
H. Anchor bolts shall extend above the top of the foundation concrete as shown on anchor bolt
detail. Refer to manufacturer’s specifications for bolt circle dimensions and anchor bolt
specifications.
I. Anchor bolts, ground rod, all reinforcing and conduit shall be in place before pouring
concrete pier foundations. Foundations shall have one continuous concrete pour.
J. Contractor shall keep a record set of plans and mark any differences between the locations
shown in the plans and the as-built locations. This record set shall be provided to the City
time of acceptance of the work.
PART 4 - MEASUREMENT AND PAYMENT
4.01 MEASUREMENT
A. Refer to TxDOT Item 416.
4.02 PAYMENT
A. Refer to TxDOT Item 416.
B. Foundations shall be paid for once regardless of extra work caused by obstructions.
END OF SECTION
City of Frisco May 2012
Standard Technical Specification Drilled Shaft Foundation 033101-2