City of Frisco Engineering Standards

E. The service enclosure shall be manufactured in a UL listed shop. It shall have a continuous
piano hinge with stainless steel pin along the side. An enclosure with the hinge along the top
of the box will not be acceptable. Service enclosures shall have no more than two (2) pieces
of dead front trim. All conduits entering the service enclosure shall be through the bottom of
the services enclosure.
F. For traffic signal installations with luminaries and illuminated street name signs (ILSN),
separate photocell and lighting contactor will be required for luminaries and ILSN (Total two
photocells and two lighting contactor).
G. Install in line fuses at all service connections.
PART 4 - MEASUREMENT AND PAYMENT
4.01 MEASUREMENT
A. This Item shall be measured on a per Each (EA) electrical service installed or removed.
4.02 PAYMENT
A. All work performed and materials furnished in accordance with this Item will be paid for at
the unit bid price for as provided under measurement for “Electrical Service” in accordance
with TxDOT Item 628. This price is full compensation for all material, labor, equipment,
tools and superintendence necessary to complete the work.
END OF SECTION
City of Frisco May 2012
Standard Technical Specification Electrical Service 260501-2