City of Frisco Engineering Standards

SECTION 334113
REINFORCED CONCRETE PIPE
PART 1 - GENERAL
1.01 DESCRIPTION
A. All material, labor, equipment, tools and superintendence necessary to furnish and install
Reinforced Concrete Pipe in accordance Texas Department of Transportation Standard
Specifications for Construction and Maintenance of Highways, Streets, and Bridges Item
464.
1.02 REFERENCES
A. TxDOT Items 400, 402, 403, 420, 464, 467, and 473
B. Section 330510 Trenching, Backfilling and Comaction
C. City of Frisco’s Standard Detail for Storm Drain Embedment and Backfill.
D. TxDOT standard details included in the plans.
PART 2 - PRODUCTS
2.01 MATERIALS
A. Refer to TxDOT Item 464.2.
PART 3 - EXECUTION
3.01 PREPARATION
A. Refer to TxDOT Item 464.3. The Excavation, Shaping, Bedding, and Backfill section
references TxDOT Item 400. The City of Frisco’s Standard Detail for Standard Storm Drain
Embedment and Backfill detail shall replace Figure 1 in TxDOT Item 400.
B. After compaction and subgrade preparation but prior to paving, television inspections tests
are required on all storm sewer mains laterals and culverts as identified on the construction
plans. The minimum information to be provided to the Owner and City’s inspectors, in both
text and video form, are line designation, length, slope, and joints. Acceptable video formats
are VHS and DVD. Any line or lines found to be defective will be corrected and another
television inspection shall be performed at the contractor’s expense
PART 4 - MEASUREMENT AND PAYMENT
4.01 MEASUREMENT
A. Refer to TxDOT 464.4.
City of Frisco May 2012
Standard Technical Specification Reinforced Concrete Pipe 334113-1