City of Frisco Engineering Standards

SECTION 331114
PVC PIPE FOR WATER DISTRIBUTION
PART 1 – GENERAL
1.01 DESCRIPTION
A. All material, labor, equipment, tools and superintendence necessary to furnish and install
Polyvinyl Chloride (PVC) Water Pipe For Water Distribution in accordance with Public
Works Construction Standards, NCTCOG, 4 th Edition, Item 501.14.
1.02 REFERENCES
A. AWWA C900, AWWA Standard for Polyvinyl Chloride (PVC) Pressure Pipe and
Fabricated Fittings, 4 in. through 12 in. (100 mm through 300 mm) for Water Distribution
B. AWWA C905, AWWA Standard for Polyvinyl Chloride (PVC) Pressure Pipe and
Fabricated Fittings, 14 in. through 48 in. (350 mm through 1,200 mm), for Water
Transmission and Distribution
C. Public Works Construction Standards, NCTCOG, 4 th Edition, Item 501.14, 502.4.2, and
502.5
1.03 RELATED SECTIONS
A. Section 330510 – Trenching, Backfilling and Compaction
B. Section 331245 – Tapping Sleeves for PVC and Ductile Iron Pipe
C. Section 331260 – Mechanical Restraint for PVC and Ductile Iron Pipe
PART 2 – PRODUCTS
2.01 MATERIALS
A. Refer to Public Works Construction Standards, NCTCOG, 4 th Edition, Item 501.14.
B. Pipe shall be manufactured in the United States of America and shall be blue in color.
PART 3 – EXECUTION
3.01 PREPARATION
A. Refer to Public Works Construction Standards, NCTCOG, 4 th Edition, Item 505.1. and
502.4.
3.02 INSTALLATION
A. Refer to Public Works Construction Standards, NCTCOG, 4 th Edition, Items 502.4 and 506.
City of Frisco May 2012
Standard Technical Specification PVC Pipe for Water Distribution 331114-1