City of Frisco Engineering Standards

SECTION 265619
LUMINAIRE POLE
PART 1 - GENERAL
1.01 DESCRIPTION
A. All material, labor, equipment, tools and superintendence necessary to furnish and install
Luminaire Poles for City of Frisco standard street lighting.
1.02 REFERENCES
A. Manufacturer’s Standard Details and Specifications for Luminaire Pole.
1.03 RELATED SECTIONS
A. Section 033101 – Drilled Shaft Foundation
B. Section 265620 – Luminaire Fixture
C. Section 260500 – Electric Conductor
D. Section 260501 – Electrical Service
E. Section 344135 – Ground Box
F. Section 347113– Barricades, Signs, and Traffic Handling
1.04 SUBMITTALS
A. Manufacturer’s Standard Details and Specifications.
B. The Contractor shall furnish four (4) sets of submittals of the carbon steel pole to the City.
These submittals shall be approved by the City before the Contractor begins work.
C. Prior to beginning fabrication, two (2) copies of the completed material identification form
shall be furnished to the City.
PART 2 - PRODUCTS
2.01 MATERIALS
A. All materials furnished by the Contractor shall be new, UL-listed, meet NEMA, NEC,
AASHTO, and the Electrical Detail standard sheet requirements.
B. The lighting assembly pole shall be 29.5 feet in height. The pole shall be a round tapered 11
gauge steel shaft with hand hole. Poles shall include breakaway coupling system that
includes four couplings with associated hardware and a two piece aluminum skirt with
attachment hardware. The aluminum skirt finish match color and type of finish specified for
the light pole. The breakaway coupling system shall conform to current AASHTO standards
and shall be approved by FHWA for breakaway characteristics at impact speeds for 20 to 60
mph.
City of Frisco May 2012
Standard Technical Specification Luminaire Pole 265619-1