City of Frisco Engineering Standards

C. The assembly will contain either one or two bracket arms. The bracket arm shall be 4 foot in
length, have a 2 3/8 inch OD and have a 21 inch upsweep. Finish color and finish type shall
match that specified for the light pole.
D. Luminaire Poles shall be either one of the following types:
1. Valmont Industries, Inc. Twin Arm Catalog No. DS30-750A290-4D-FP with 30"x96"
concrete pier.
2. KW RTSU30-7.5-11-BLK-24S- BSC-1.0-SKT-NC
E. All Luminaire Poles shall have a powder-coated paint finish of RAL9017 (TRAFFIC
BLACK) unless otherwise directed by the City. All assemblies shall be hot dipped galvanized
to ASTM 123 and 153 specifications. Once galvanizing is completed, all exposed surfaces
shall be mechanically etched by blast cleaning to remove mill scale, impurities and nonmetallic
foreign materials. All surfaces visually exposed are to be coated with a Urethane or
Triglycidyl (TGIC) Polyester Powder to a minimum film thickness of 2.0 mils. The coating
shall be electrostatically applied and cured in a gas fired convention oven by heating the steel
substrate between 350 and 400 degrees Fahrenheit.
PART 3 - EXECUTION
3.01 PREPARATION
A. The Contractor shall notify the Traffic Department (Tracy Nichols) at least 7 business days
prior to any work on this project and provide a construction schedule with weekly progress
reports.
B. The Contractor shall clean up and remove all loose material resulting from construction
operations.
C. All electrical work shall be in accordance with the most current National Electrical Code,
City and TxDOT specifications and standards.
D. The Contractor shall coordinate electrical services with the City of Frisco and either ONCOR
or COSERV representatives (according to their respective area).
E. Proposed street light pole foundations shall be staked by the Contractor and approved by the
City prior to installation.
F. Erection of poles, luminaries and structures located near any overhead or underground
utilities shall be accomplished using established industry and utility safety practices. The
Contractor shall consult with the appropriate utility company and TxDOT prior to beginning
such work.
G. All shop drawings, working drawings or other documents which require review by the City
and shall be submitted by the Contractor sufficiently in advance of scheduled construction to
allow no less than 14 calendar days for review and response by the City.
H. If any overhead or underground power lines need to be de-energized, the Contractor shall call
the electric company to do this work. Any cost associated with de-energizing the power line
and/or any other protective measures required shall be at the Contractor’s expense.
City of Frisco May 2012
Standard Technical Specification Luminaire Pole 265619-2