TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Figure 114: Erasing v ideo from a camera
Erase recorded video
from Camera 3
2. You are prompted to confirm that you want to erase the video:
Figure 115: Confirmation prompt
3. Click OK. The recordings are erased, and a confirmation message appears below the Main Menu.
Figure 116: Confirmation that recordings w ere erased
4. Restart the unit.
Note: No recording will take place from the camera until the unit is restarted (see Resetting the Unit,
page 161).
Configuring Camera Settings 105