TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SerVision</strong><br />
<strong>TVG</strong> <strong>System</strong> <strong>Guide</strong><br />
To manually switch the running outline:<br />
• In the Outlines screen, in the line in which the outline is listed, or in the relevant outline configuration screen,<br />
click Activate. The selected outline runs immediately. If the Outlines screen was not already opened, it<br />
opens and displays an updated summary of the outline settings.<br />
Note: The Activate button does not appear if sensor-triggered or scheduled outline switching is activated<br />
(see General <strong>System</strong> Settings, page 19).<br />
To select the start-up outline:<br />
1. In the Outlines screen, in the line in which the outline is listed, or in the relevant outline configuration screen,<br />
select Load Outline on <strong>System</strong> Start.<br />
Note: The Load Outline on <strong>System</strong> Start checkbox does not appear if sensor-triggered or scheduled<br />
outline switching is activated (see General <strong>System</strong> Settings, page 19).<br />
2. Click Activate (to the right of the checkbox). The selected outline runs immediately, and is selected as the<br />
start-up outline that will be loaded automatically whenever the system starts. If the Outlines screen was not<br />
already opened, it opens and displays an updated summary of the outline settings.<br />
Defining Alternate Outlines 124