TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SerVision</strong><br />
<strong>TVG</strong> <strong>System</strong> <strong>Guide</strong><br />
Figure 143: Restart confirmation message<br />
Note: To continue configuring the unit, click the link and log into the configuration utility again.<br />
Note: If you do not restart the unit at this time, most changes are not implemented on the unit, but they are<br />
saved on it. The next time the unit is reset, the changes are implemented.<br />
Discarding Changes<br />
Once you have saved a change to the unit's settings in the configuration utility, the change is stored on the unit.<br />
When the unit is next restarted, the change is implemented. If the unit has not yet been restarted, you can choose to<br />
cancel all configuration changes that were not yet implemented. If you choose this option, changes that have not yet<br />
been implemented are erased from the unit, and are not implemented when the unit restarts.<br />
To discard all configuration changes that were saved but were not yet implemented:<br />
1. In the Main Menu, under <strong>System</strong>, click Save Settings. The Save Settings screen opens.<br />
2. In the Save Settings screen, click Discard Changes. The changes are canceled, and the Changes<br />
Discarded screen opens:<br />
Saving Configuration Changes 127