TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SerVision</strong><br />
<strong>TVG</strong> <strong>System</strong> <strong>Guide</strong><br />
• Field<br />
Server<br />
• Description<br />
Fill in the IP address or hostname of the AVV upload server.<br />
Use Same Server for<br />
Upload and Download<br />
Download Server<br />
If the URL for uploading and downloading is the same, select this checkbox.<br />
Otherwise, clear this checkbox. The Download Server field is added to the<br />
screen.<br />
Fill in the IP address or hostname of the AVV download server. The URL must<br />
include the network protocol (e.g., http or ftp).<br />
Note: This field only appears if the Use Same Server for Upload and<br />
Download is selected.<br />
Port Fill in the port used for FTP connections to the AVV server (usually 21).<br />
Upload Path<br />
Username<br />
Password<br />
Download Path<br />
Fill in the path of the FTP directory on the AVV server. The <strong>TVG</strong> will upload the<br />
video files to this directory.<br />
Fill in the username required to access the FTP directory on the AVV server.<br />
Fill in the password required to access the FTP directory on the AVV server.<br />
Fill in the path of the HTTP directory on the AVV server. You will download the<br />
video files to your PC from this directory.<br />
4. Under Recorder Settings, do one of the following:<br />
•• If you want to use the same recorder quality settings for the downloaded video as those used for recorded<br />
video that is stored on the <strong>TVG</strong>, select Use Default Settings. Then skip to step 6.<br />
•• If you want to select different recorder quality settings, clear the Use Default Settings checkbox. The<br />
fields required to configure the recorder settings are added to the screen.<br />
Figure 73: A V V custom recorder settings<br />
Note: Default recorder settings are set in the Camera screen. For additional information, see Video<br />
Recording Settings, page 96; Advanced Recorder Settings, page 97.<br />
5. Fill in the fields as follows:<br />
• Field<br />
• Description<br />
Maximum Size<br />
Select the desired frame size for the downloaded video. If the unit is configured to use<br />
VGA video resolution, you can choose on of the following:<br />
• QSIF: Small frame (160x120 pixels)<br />
• SIF: Medium-sized frame (320x240 pixels)<br />
• VGA: Large frame (640x480 pixels)<br />
If the unit uses D1 video resolution, you can choose one of the following:<br />
• QCIF: Small frame (176x120 pixels for NTSC systems and 176x144 for<br />
PAL systems)<br />
• CIF: Medium-sized frame (352x240 pixels for NTSC systems and<br />
352x288 pixels for PAL systems)<br />
Configuring <strong>System</strong> Settings 67