TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SerVision</strong><br />
<strong>TVG</strong> <strong>System</strong> <strong>Guide</strong><br />
Playback by Time<br />
If you selected playback by time in the Playback menu, the Time Selection screen opens.<br />
Figure 199: Time Selection screen<br />
To play back recorded video by time:<br />
1. Under From, select the date and time at which you want to begin playback, and under To, select the date and<br />
time at which you want to end playback, as follows:<br />
•• Select the value you want to modify (e.g., in the figure above, under From, select “12” if you want to<br />
change the minute value of the start time), or select the right and left arrows<br />
the values. A box appears around the selected value.<br />
•• Select the up and down arrows<br />
as necessary to modify the selected value.<br />
The duration of the selected time period appears under Duration.<br />
Note: To close the screen and return to live video display, select Done.<br />
to scroll through all of<br />
2. Select Play. The Playback screen opens, and the video is played, beginning with the specified start date and<br />
time, in the size you specified in the Playback menu. Playback controls appear in the upper left of the screen.<br />
See The Playback Screen, page 178, for information about the Playback screen.<br />
Playback by Sensor<br />
If you selected playback by sensor in the Playback menu, the Sensor Selection screen opens. The screen contains<br />
a list of the sensors connected to the selected camera (including the camera’s VMD, if it is activated).<br />
Appendix A: Viewing Video on a CCTV Monitor (TV-Out) 176