TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Figure 64: SMS and E-mail screen
2. Under Message Template, modify the text of the message that should be sent to the SMS recipients on the
list, as necessary. The message can contain up to 45 characters, including spaces. It should not include
quotation marks of any kind (", ', or `).
Note: The message text can contain variables that are replaced by the system with relevant values in the
actual message. For example, the message can include the name of the device that triggered the event. For
additional information, see SMS Message Templates, page 63.
The default message includes the recipient’s name, the name of the TVG unit, the name of the device that
triggered the event, and the time at which the event was triggered. If the message has been changed from its
default version, and you want to replace the current message text with the default text, click Restore
Default Template.
3. For each recipient of an SMS or e-mail message, under Recipients, click Add. A row is added to the list of
recipients.
Figure 65: New recipient row
Fill in the fields as follows:
• Field
Name
• Description
The name of the person who will receive an SMS or e-mail message when an event
occurs (up to 20 characters).
Configuring System Settings 60