TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SerVision</strong><br />
<strong>TVG</strong> <strong>System</strong> <strong>Guide</strong><br />
Mark<br />
Blue x<br />
Green x<br />
Red x<br />
None<br />
Black x on white background<br />
Description<br />
Low VMD sensitivity<br />
Medium VMD sensitivity<br />
High VMD sensitivity<br />
No motion detection<br />
Region blacked: no video capture<br />
4. If you want to set the entire FOV to the specified sensitivity level, click the relevant sensitivity level, and then<br />
click Set all regions. The xs marking the entire FOV are colored, or removed, accordingly.<br />
5. If you want to apply the current sensitivity level to a rectangular area of the FOV (containing multiple region<br />
markers), do the following:<br />
•• Make sure the Change Multiple Times checkbox is selected.<br />
•• Click one corner of the rectangular area. A border appears around the region.<br />
Border<br />
Figure 101: FOV w ith border around selected marker<br />
•• Click the diagonally opposite corner of the rectangular area. The current sensitivity level is applied to the<br />
entire rectangle.<br />
Configuring Camera Settings 91
Change language