TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SerVision</strong><br />
<strong>TVG</strong> <strong>System</strong> <strong>Guide</strong><br />
• Field<br />
• Description<br />
• D1: Large frame (704×480 pixels for NTSC systems and 704x576 pixels<br />
for PAL systems)<br />
Note: Large frame (VGA or D1) is available only if large-frame recording is activated for<br />
one or more of the cameras connected to the <strong>TVG</strong>. (See Advanced Recorder Settings,<br />
page 97.)<br />
For additional information about video resolutions, see Video Resolution, page 19.<br />
Note: If you select a frame size that is larger than the frame size of the default recording<br />
setting of a camera, the default setting is used and the value you specify is not<br />
implemented. For example, if VGA is selected here, and recording for the camera is in<br />
SIF, the uploaded video will be in SIF.<br />
Note: This setting only affects the resolution of the video uploaded to the AVV server; it<br />
does not affect the size of the image attached to the e-mail notification.<br />
FPS<br />
KBPS<br />
Fill in the required framerate for the recordings, in frames per second.<br />
Note: If you specify an FPS value that is larger than the FPS value of the default<br />
recording setting of a camera, the default setting is used and the value you specify is not<br />
implemented.<br />
Fill in the required bitrate for the recordings, in kilobits per second.<br />
Note: If you specify a KBPS value that is larger than the KBPS value of the default<br />
recording setting of a camera, all of the default quality settings are used and the values<br />
you specify for maximum size, FPS, and KBPS are not implemented.<br />
6. Click Update, and then save the settings. The AVV option is added to the camera, sensor, and activator<br />
screens. The changes will be implemented after the unit is restarted (see Saving Configuration Changes,<br />
page 125).<br />
Note: You can now configure devices to act as triggers for AVV. A list of devices that are configured to<br />
trigger AVV is displayed at the top of the AVV screen.<br />
Devices configured to trigger AVV<br />
Figure 74: List of dev ices configured to trigger A V V<br />
Configuring <strong>System</strong> Settings 68