TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Figure 167: Run w indow
•• In the Run window, in the Open field, type cmd, and then click OK. A Command Window opens.
Figure 168: Command W indow
2. In the Command Window, type tracert , where is the IP address of the TVG. For example,
type
tracert 216.10.144.11
3. Press Enter. Traceroute sends three packets, and follows their route for up to 30 steps from the sender to the
target. For each step in the route, the time it took for each packet to arrive from the previous machine, and the
IP of the current machine, are displayed.
System Diagnostics 145