TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
The unit can be configured to periodically perform a routine maintenance procedure. The procedure helps ensure
the unit will function optimally over long periods of time. During the maintenance procedure, the system is
temporarily unavailable. The procedure takes up to three minutes.
Models without built-in SerVision routers (HVG, CVG, and CVG-M units) can be configured to wait a specified
period of time after startup before attempting to connect to the local network. This option is useful in network
configurations in which it is desirable to allow time for the local network to get up and running after a power outage
or other interruption in network communication before the TVG attempts to connect to the network.
To configure the maintenance options:
1. In the System Diagnostics screen, click Maintenance. The Maintenance screen opens.
Figure 175: Maintenance screen (MV G, UV G)
Figure 176: Maintenance screen (HV G, CV G, CV G-M)
2. Under Scheduled maintenance at, select the time at which you want the maintenance procedure to run.
3. In the text field between Every and Days, fill in how often you want the maintenance procedure to take
place, in days. If you do not want the maintenance procedure to run at all, type “0.”
System Diagnostics 150