TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Figure 99: V MD settings
2. If you want to define the level of sensitivity of the motion detection that is implemented in the field of view
(FOV), and perhaps specify different levels of sensitivity for different regions of the FOV, under Regions,
select Enabled. Otherwise, skip to step 8.
The fields required to define sensitivity levels and regions are added to the screen, and, if the camera is
connected to the unit, the current FOV is displayed:
Figure 100: Region sensitiv ities in the FOV
Note: To update the snapshot of the camera’s FOV, click Reload Snapshot.
Note: If the camera is not connected to the TVG, the FOV is blank.
3. Click the sensitivity level you want to apply to a region or regions of the FOV. The selected level appears
below the list under CURRENT. For example, in the figure above, MEDIUM SENSITIVITY is selected.
Note: The following region marks can be used:
Configuring Camera Settings 90