TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Viewing System Information on the Monitor
You can view the following system information on the monitor:
• Name of the unit
• Main private IP of the unit
• Secondary (zero-conf) private IP of the unit
• Net mask
• Firmware version
To view system information:
• In the main monitor menu, select Sys info. The System Information screen opens:
Figure 224: Sy stem Information screen
Using PTZ Controls
If cameras with PTZ controllers are connected to the TVG, and the controllers are connected to the unit and
activated in the unit's configuration, you can perform the following tasks on the monitor:
• Move the cameras using all the supported features of the camera: pan, tilt, and zoom
• Select and save a preset location
• Move the camera to a preset location
To use PTZ controls:
1. In the main monitor menu, select PTZ. The PTZ menu opens.
Appendix A: Viewing Video on a CCTV Monitor (TV-Out) 196