TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SerVision</strong><br />
<strong>TVG</strong> <strong>System</strong> <strong>Guide</strong><br />
• Mouse/Touch: HVG and UVG models are supplied with a mouse. If the mouse is connected to the <strong>TVG</strong>,<br />
you can use it to perform a variety of operations on the monitor: changing the sizes of the camera panes,<br />
selecting cameras, activating PTZ camera controls, and playing recorded video. The same operations can be<br />
performed on MVG, CVG, and CVG-M units if they are connected to supported touchscreen monitors. In this<br />
case, touching the screen activates the same features that would be activated on the other models by clicking<br />
the left mouse button.<br />
• Push-button switch: If a switch is connected to the relevant sensor connector on the rear panel of the unit,<br />
you can use the switch to cycle through the various available display types. However, you can only view live<br />
video, and PTZ controls are not available.<br />
NOTE:<br />
Mouse/touch controls only work if they are enabled in the configuration, and a push-button switch can<br />
only be used if the relevant sensor connector is configured properly and the option is enabled. For<br />
additional information, see Configuring a CCTV Monitor (TV-Out), page 28; Configuring a Sensor to<br />
Control CCTV Display, page 116.<br />
The rest of this appendix explains how to use the mouse/touch controls to perform various operations. For<br />
information about connecting the supplied mouse or a supported touchscreen monitor, please refer to the <strong>TVG</strong><br />
unit’s installation guide.<br />
NOTE:<br />
If you are using a touchscreen, it is recommended that you calibrate it before you use it for the first<br />
time. For information about how to do this, please consult the manufacturer’s documentation or your<br />
vendor. In addition, for optimal precision and sensitivity, it is recommended to use a pen, a pencil, or a<br />
stylus to tap the screen. Do not press hard or stab the display – the screen is quite delicate!<br />
Using Mouse/Touch Controls<br />
If mouse/touch controls are set up and enabled on your <strong>TVG</strong> (see page 172), you can perform the following actions:<br />
• Switch from split-screen to full-screen display<br />
• View recorded video<br />
• Edit and download recorded video<br />
• Configure picture and display properties<br />
• View system settings<br />
• Control PTZ cameras<br />
These actions are performed through a menu that can be displayed on the monitor’s screen.<br />
To open the monitor’s main menu:<br />
• Click/tap anywhere on the screen. The menu is displayed on the left side of the screen. A single quarter-screen<br />
camera pane is displayed in the upper-right corner of the screen.<br />
Appendix A: Viewing Video on a CCTV Monitor (TV-Out) 172