TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Figure 216: Config menu
Adjusting Camera Brightness and Contrast
Initial camera brightness and contrast settings are set in the configuration utility (see Configuring Camera Settings,
page 83). You can modify these settings on the monitor, and, if you wish, save the new settings to the unit’s
configuration.
NOTE:
Changing these parameters immediately affects all the video streams from the relevant camera, both
live and recorded, as explained below (see step 5, page 191).
To modify the brightness or contrast of a camera:
1. In the Config menu, select Picture Params. The Picture Params screen opens:
Appendix A: Viewing Video on a CCTV Monitor (TV-Out) 190