TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
To download the firmware to the unit:
1. Double-click the TVG_download.exe file. The Download Utility opens:
Figure 180: Dow nload Utility
Note: The version number of the Download Utility appears in the title bar.
2. Select LAN.
3. In the IP and Port fields, enter the IP address and port of the unit in one of the following ways:
•• Manually enter the values.
•• If the TVG unit is on the same local network as the PC, click Find units. The opens and lists all of the
TVG units on the network. Select the relevant TVG and then click Select. The IP and Port fields are
filled in.
Figure 181: List of TV Gs on the local netw ork
Note: If the unit has just started up, it may not appear until its boot process is completed. In this case,
click Exit to close the Find gateways dialog box, wait a minute, and then open the Find gateways
dialog box again.
Upgrading the Firmware 155