TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
5. Click OK. The message closes.
Note: The Catch Boot operation does not perform a login; it is not necessary to fill in the Username and
Password fields.
6. Click File. A file selection dialog box opens.
7. Browse to the TVX firmware file that you want to download to the unit, and then click OK. The file name
appears in the window.
Figure 186: Catch Boot option w ith firmw are file selected
Note: The Limit MTU option has no affect on the Catch Boot operation.
8. Click Download.
9. Disconnect the unit from the power supply and then reconnect it. The download process starts automatically,
and the new firmware is downloaded to the unit.
Upgrading the Firmware 159