TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
• Configuring Video Lost, page 94
• Configuring Sensor and Activator Settings, page 110
NOTE:
A list of devices that are configured to trigger AVV is displayed at the top of the AVV screen (see
figure 74, page 68).
To configure the settings of the AVV server:
1. In the Main Menu, under System, click AVV. The Alarm Video Verifications screen opens:
Figure 71: A larm V ideo V erifications screen
2. Under AVV, select Enabled. The fields required to configure the AVV settings are added to the screen.
Figure 72: A V V screen expanded
3. Fill in the fields as follows:
Configuring System Settings 66