TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
4. Navigate to the location on your PC in which you want to save the video clip file, and then click Save. The
file is saved in the selected location.
5. Open the MultiClient.
6. Play the video clip file in the MultiClient in one of the following ways:
•• Drag the downloaded file to a camera pane in the MultiClient.
•• In the Tools menu, select Play Downloaded Video. Navigate to the file, select it, and then click in a
camera pane.
The video clip is played in the camera pane.
Note: For additional information about playing video files in the MultiClient, please refer to the relevant user
guide.
Disabling AVV
Once AVV uploading has been enabled, you can disable it as follows:
To disable AVV uploading:
1. Ensure AVV is disabled for all cameras and sensors connected to the TVG unit.
Note: To do this, in the AVV screen, check the list of devices for which AVV is activated. The list appears
below the Enabled field if AVV is activated for any devices (see figure 74). For each device in the list,
disable AVV in the configuration screen of the device. (For information about how to do this, see the
following: on VMD settings, see page 88; on video lost settings, see page 94; on sensor and activator settings,
see page 110.)
2. In the Main Menu, under System, click AVV. The Alarm Video Verifications screen opens.
3. Under AVV, clear the Enabled checkbox. The fields used to configure the AVV settings are removed from
the screen.
Note: This checkbox is disabled if AVV is enabled in any VMD or video lost settings, or in the settings of
any sensor or activator.
4. Click Update, and then save the settings. The AVV option is removed from the camera, sensor, and activator
screens. The changes will be implemented after the unit is restarted (see Saving Configuration Changes,
page 125).
FTP Server Settings
You can specify an FTP server to which video can be downloaded manually. If you do so, you can select events for
download in the Events screen (see Viewing and Downloading Events, page 135), and the video of the events is
downloaded to this server. In addition, if your system has a CCTV monitor, you can also download video to this
server using the monitor (see Editing and Downloading Video Excerpts, page 180).
To configure the settings of the FTP server:
1. In the Main Menu, under System, click FTP. The FTP Download configuration screen opens:
Configuring System Settings 71