TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Opening the MultiClient
The first time you open the MultiClient, you must choose whether to enable security. When security is enabled,
access to the MultiClient is limited to authorized users; otherwise, it is available to anyone using the PC. At this
stage, it is not necessary to enable security.
NOTE:
You can enable security later if necessary. For information about MultiClient security settings, see the
MultiClient User Guide.
To open the MultiClient:
1. Start the program by double-clicking the desktop icon or by selecting it in the Start menu
(Start>Programs>SerVision>SVMultiClient>SVMultiClient).
You are prompted to decide whether to enable security or not:
Figure 2: Enable security prompt
2. Select No. The MultiClient window opens.
Figure 3: MultiClient w indow
Getting Started 8