TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Figure 209: Sensor Selection screen
To select the video excerpt by time:
1. In the Time-Selection screen (figure 208), under From, select the date and time of the beginning of the
excerpt, and under To, select the date and time of the end of the excerpt, as follows:
•• Select the value you want to modify (e.g., in the figure above, under From, select “12” if you want to
change the minute value of the start time), or select the right and left arrows
the values. A box appears around the selected value.
•• Select the up and down arrows
as necessary to modify the selected value.
The duration of the selected time period appears under Duration.
to scroll through all of
Note: To close the screen and return to the Edition menu without adding any new items to the edition, select
Done.
2. Select Add. The excerpt is added to the edition. The Time Selection screen closes, and the Edition menu
appears. The item counter at the top of the Edition menu indicates that a new item has been added to the
edition. For example, it this is the second item that was added, (2 items) appears at the top of the menu.
Appendix A: Viewing Video on a CCTV Monitor (TV-Out) 184