TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
TVG-Series System Guide v1-4 - SerVision
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SerVision</strong><br />
<strong>TVG</strong> <strong>System</strong> <strong>Guide</strong><br />
Figure 60: A dv anced SV -DDNS settings<br />
Fill in the fields as follows:<br />
• Field<br />
DDNS Server<br />
DDNS Port<br />
• Description<br />
Fill in the IP address or hostname of the SV-DDNS server.<br />
Fill in the access port of the SV-DDNS server.<br />
6. Click Update, and then save the settings. They will be implemented after the unit is restarted (see Saving<br />
Configuration Changes, page 125).<br />
Authentication<br />
Access to the system is controlled by username-password authentication. You can create up to ten users. For each<br />
user, you can define a specific combination of system permissions. Users can be assigned any or all of the following<br />
permissions:<br />
• Permission • Description<br />
Live Video<br />
Recorded Video<br />
Camera Control<br />
Configuration<br />
The user can connect to the unit through a client application and view live video.<br />
The user can connect to the unit through a client application and view recorded video.<br />
The user can connect to the unit through a client application and control cameras using their<br />
PTZ controllers.<br />
Note: The Live Video permission must also be selected in order for the user to make use of<br />
this feature.<br />
The user has full access to the unit’s configuration utility and can modify the configuration<br />
settings.<br />
By default, two users are defined:<br />
• A user with permissions for all of the system’s features. The default username for this user is svuser and the<br />
password is servconf.<br />
• A user with all client permissions – live video, recorded video, and camera control – but no configuration<br />
permission. The default username for this user is anonymous and the password is guest.<br />
You can modify the default settings and add new users as necessary. It is recommended that you change the default<br />
usernames and passwords of both of the default users.<br />
NOTE:<br />
Multiple users can log into the system simultaneously using the same username and password.<br />
Configuring <strong>System</strong> Settings 57