TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
• Field
• Description
Port Fill in the port used for FTP connections to the FTP server (usually 21).
Username
Password
Fill in the username required to access the FTP directory on the FTP server.
Fill in the password required to access the FTP directory on the FTP server.
4. Click Update, and then save the settings. The changes will be implemented after the unit is restarted (see
Saving Configuration Changes, page 125).
Schedules
Schedules allow you to configure the unit to automatically switch the running outline at specified times. You can set
up standard repeating schedules for routine time periods, such as regular work weeks or the summer months. You
can also define special schedules for holidays, both repeating holidays (e.g., New Years Day) and non-repeating
holidays (e.g., a presidential visit or the opening ceremony of the Olympics).
The schedule is only implemented by the system if the following conditions are met:
• Multiple outlines are defined for the system (see Defining Alternate Outlines, page 118)
• Schedule-triggered outline-switching is activated in the General System Settings screen (see General
System Settings, page 19)
To configure the schedule:
1. In the Main Menu, under System, click Schedules. The Schedules screen opens. If schedule-triggered
outline switching is not activated in the General System Settings screen, Inactive appears in parentheses
after the name of the screen. In this case, you can configure the schedule, but it will not be implemented unless
you activate schedule-triggered outline switching.
Figure 80: Schedules screen (inactiv e)
2. Select Enabled. The schedule grid and its controls are displayed.
Configuring System Settings 73