TVG-Series System Guide v1-4 - SerVision

SerVision
TVG System Guide
Figure 215: Clear screen
Note: To return to the Edition menu, select Done.
Configuring Display Options
The default display options are defined in the unit’s configuration utility. You can modify these settings using the
Config menu, and you can save the new settings in the unit’s configuration.
The Config menu provides access to three screens:
• Picture Params screen: Sets the brightness and contrast of each camera
• TV-Out Params screen: Sets the loop interval for the full-screen display that switches from camera to
camera, activates and deactivates the screen saver, and sets the timeout for the screen saver
• OSD Params screen: Configures the on-screen display (OSD) of the camera name and of the timestamp for
recorded video
To open the Config menu:
• In the main monitor menu, select Config.
Appendix A: Viewing Video on a CCTV Monitor (TV-Out) 189