13.01.2015 Views

Surgil ESIA Report - Volume III - EKN

Surgil ESIA Report - Volume III - EKN

Surgil ESIA Report - Volume III - EKN

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

OAJ “O’ZLITINEFTGAZ”<br />

ПТЭО «Комплексное обустройство<br />

месторождения Сургиль с извлечением ценных<br />

компонентов»<br />

- All service equipment, fittings, gas and condensate, liquefied natural gas pipelines<br />

should be securely sealed.<br />

- Discharge of gas through the safety valves and gas weathering should be mandatory<br />

flared;<br />

- Height of the torch should provide permissible concentration in air of working area<br />

of the combustion products of gas.<br />

To ensure maximum integrity and minimizing leakage into the environment mainly<br />

intended application of reinforcement with the accession of "weld".<br />

All control valves must be in flange version to be able to audit the valves.<br />

Provides for the protection of equipment system of safety valves, consisting of<br />

working and backup valves.<br />

To ensure uninterrupted operation of technological installations project provides for:<br />

- Sealing equipment and pipelines;<br />

- Application for heat and sound insulation of pipelines and equipment noncombustible<br />

materials;<br />

- Installation of technological equipment with all the necessary means of control,<br />

automation, safety valves (waste, check valves, etc.), providing a reliable and trouble-free<br />

operation;<br />

- Remote control of suppressing the valves on the pipe, valves on spark discharge<br />

pressure in the supply pipeline;<br />

- Emergency lights powered by batteries;<br />

- The use of explosion-proof equipment for hazardous areas;<br />

- Protection of the pipeline from electromagnetic induction, static electricity, and<br />

measures to prevent the introduction of high potentials in the building;<br />

- The use of seamless steel pipes for gas pipelines and other process piping required<br />

hydraulic test each pipe in the factory;<br />

- The use of welded joints on pipelines and pipelines with explosive substances;<br />

- The use of shaped pipeline fittings (elbows, tees, transitions), prefabricated, tried<br />

and tested at the factory;<br />

- Identification painting of pipelines and other process piping.<br />

In order to protect personnel against heat hot surfaces of equipment and piping in the<br />

service area are insulated, providing the temperature of hot surfaces within the permissible<br />

limits of health regulations.<br />

Sewage<br />

Resetting the industrial wastewater produced in the GCC is projected on a sewer<br />

system and further treatment sooruzheniyav and then to evaporation ponds. Household<br />

Книга 2. Часть 2. Проект ЗВОС по строительству ГХК<br />

78

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!