(VERSION-IV) - DVC :: Consumer Login

4
a. Maintaining cleanliness at workplace while working (use of
working trays, container etc.)
b. Proper handling of grease, oil etc. (proper container, no
spillage & Contamination etc.)
c. Cleaning the workplace including removal of scrap after
completion of the job, removal of debris etc.
06
5 Use of proper tools & tackles applicable for a particular job. 05
6
B
1
2
3
4
C
1
2
3
4
5
Training of contractor’s manpower at DVC training centre for at
least 02 hours per fortnight.
Adherence to Time Schedule: Maximum 30 Marks
Availability of all tools & tackles (under the scope of contractor)
without any time delay.
Mobilization of proper skilled & unskilled manpower without
any time delay
a. Completion of job within the time frame specified in the
contract (wherever available)
b. Advance Scheduling of Jobs along with Engineer In charge
before start of the job.
Mobilization time taken to start the job at the beginning of the
contract after getting intimation from the Engineer In charge.
Promptness to call.
Adherence to Safety : Maximum 15 Marks
100% Supply of PPE & Uniform as identified in contract for
workers.
Follow health and safety plan whatever layout by safety deptt
time to time
Special care while working at heights. (Use of proper sized
platform / safety belts etc).
Proper handling of material (while lifting heavy material at
height). (Example: Use of cage / basket etc).
Periodic testing of lifting tools & tackles which are at the
contractor’s scope Inspection of Tools & Tackles before start of
work and during the execution of contract whenever required.
6 Participation in Safety Awareness of the workers and training 01
W& P Manual – 2012 Page 128
04
05
05
10
05
05
05
02
02
02
02