(VERSION-IV) - DVC :: Consumer Login

ANNEXURE –G
DAMODAR VALLEY CORPORATION
NAME OF THE PLANT :……………………………………
ADDRESS :……………………………………………………
CERTIFICATE OF OEM/OES/ PROPRIETORY/STANDARDISED ARTICLES
A. Manufacturer’s/Vendor’s ::
Name and Address & details of works where the item is manufactured
B Description of Articles ::
C. Control Code No ::
D. Indigenous/Imported Item ::
E. If Imported, Name of the Indian Agent if any ::
F. Indent No with Date ::
G. Estimated Value ::
H. Basis of estimate : ………………………
1. This is to certify that to the best of my knowledge the items covered in the above indent are
manufactured by the manufacturer indicated above only and as such these items are declared to
be proprietary items of them.
2. This is to certify that the above item has been standardized for a period of
vide Office Memorandum No.
dated
.
3. This is to certify that the spares covered in above Indent are required for use on the equipment
manufactured as indicated on the face of indent and as such these spares are declared as
proprietary spares of them.
4.a)This is to certify that items covered in above indent are required for use on the equipment
manufactured by the vendor indicated on the face of Indent and given therein above will only
serve our purpose and no other make shall be suitable. Hence the items indented may be
procured from them on single tender basis.
4. b) This is to certify that the equipment indented is from Original Equipment Manufacturer
(OEM)
5. (a) In case the indented item to be procured from OES, Indenting authority should certify that
to the best their knowledge no substitute for the items covered in the above indent are
available in the market and there is no other vendor available for supply of the indented
item.
W& P Manual – 2012 Page 199