d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationSettings and Configurations4090Another Paper settings screen opens.The buttons Switch 1 to Switch 4 define the code for the paper width. For the AgfaPhotostandard code refer to the table in Paper Codes according to AgfaPhoto Standard in thischapter. It is also possible to use other codes. However, make sure that the same code,which is defined here, is set on the paper magazine for the respective width (see PaperMagazine Codes in Chapter 6). Otherwise errors occur in production. As required the switches Switch 1 toSwitch 4 can be switched on or off.A switch is on if the slide on the papermagazine is closed;switch off means the slide on the papermagazine is open. Press Save as.Type the name for the new paper widthorpress Save(this option is only displayed if the screenwas called with Edit).Up to 15 different paper width can be defined (the combination where all switches 1–4are off cannot be used).AgfaPhoto 2005-05-01 / PN 04092_01 4-13