d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationTroubleshooting7.6.5 Paper Processor and Printer ErrorsSome errors cause the Printer to stop. If paper is still in the transport area of the Printer, itmust be removed before the work can be continued.If an error occurs during a reset, a message appears indicating unsolved errors. Theseactive errors must be cleared from the error list. Deactivate the option Show all errors inthe Error list screen to display only active errors (see Display Error List in Chapter 2).If an error occurs during a reset (after the Stop button was pressed or the ON key), or ifthe error was not cleared by the reset, a message indicates the presence of unsolvederrors. These active errors must be repaired and cleared in the error list. Deactivate theoption Show all errors in the Error list screen to display only active errors.7AgfaPhoto 2005-05-01 / PN 04092_01 7-11