12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

d-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationMaintenance8.4.5.2 Sheet Stocker (SR) and Sheet Bridge (SB)Applies to d-<strong>lab.2</strong>plus and net<strong>lab.2</strong>plusSpecial tools– Vacuum cleaner– Brush Open the Printer front door. Unlock the feeder unit (FU) and pull it out onthe telescopic rails.CAUTION!Only pull out the feeder unit if the LEDshows green!In case of a paper jam the LED shows red.To avoid damage always pull out the printmachine first in such cases!If the print machine is pulled out the LEDswitches to green. The feeder unit can bepulled out.823G_SG1041 Pull up the quick-action lock (1), pull thecover plate of the sheet stocker (SR) a littleto the front and remove it. Hold the sheet bridge (SB) by the red handleon the right and fold it to the left (3). Remove the paper dust with a vacuumcleaner. Set the sheet bridge back to its initialposition: mind the lock-in position. Push the cover plate of the sheet stockerinto the holding brackets (2) at the back andfasten it at the front by snapping in thequick-action lock (1). Push in the feeder unit and lock it. Close the Printer front door.AgfaPhoto 2005-05-01 / PN 04092_01 8-23

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!