d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Productiond-lab.2, d-lab.2plus, netlab.2plus: Operation6.1.9.4 PortraitsPortraits may come out too sharp and thus seem unnatural. Remedy:– Set up a correction configuration with the following settings and add it to the orderconfiguration (this applies then to all pictures of the order for which this configurationis selected).or– In the print mode with preview press Image editing > Edit to enter the followingsettings (applies to the current image):Area contrast +1Detail contrast 0Sharpness - edges –4Saturation –16.1.9.5 Border PrintsThere are two possibilities to print border prints:1. Border color and width are defined in an order configuration. This settings applies toall images in an order. Enter the desired border width in the Orderconfiguration screen (see Defining andEditing Order Configurations in Chapter 4)under Border and select the desired colorunder Border color (see Defining andEditing an Order Configuration of the SingleType in Chapter 4).022_dpsi6-24 2005-05-01 / PN 04092_01 AgfaPhoto