d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus: OperationProductionPrint the image (in the normal view or theenlarged view): Press one of the following buttons.Print & StopThe current frame is printed. It remainsdisplayed so that other modificationsand further prints can be made.AutoprintThe current frame is printed and nolonger displayed: The next frame movesin from the left.SkipThe current image is not printed and isno longer displayed. The next framemoves in from the left.If you want to change to print mode Autoprintwithout preview (only in the normal view withfour images): Press Preview offThe preview disappears; the remainingimages of the order are printed with thepreset configuration.After editing of the film / film strip: If the order consists of several film strips,insert all film strips one after the other, editthe images and print them.Finish the order after the last film strip isthere is no automatic end of order.6End of orderIn the normal view or the enlarged view: If necessary press End of order after filmstrip.This button is only active,– if the automatic order end was deselected (see Other Settings in Chapter 4),– if the automatic order end was selected, however the film length is shorter than thesetting (preset: 400 mm; see Other Settings in Chapter 4).NoteIn Autoprint mode with preview, the next order can only be edited after end of orderhas been entered for the current film.AgfaPhoto 2005-05-01 / PN 04092_01 6-39