12.07.2015 Views

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

d-<strong>lab.2</strong>, d-<strong>lab.2</strong>plus, net<strong>lab.2</strong>plus: OperationMaintenance8.4.5.4 Sheet Distributor (SD): Remove Paper Dust and DepositsApplies to d-<strong>lab.2</strong>plus and net<strong>lab.2</strong>plusCAUTION!Danger caused by toothed belts that may run in the marked area: risk of bruising.Do not reach into the machine.Purpose:To avoid transport problems.Tools and/or material– Vacuum cleaner– Brush– Isopropanol, (for plastic-coated rollers, not for rubber rollers)31 Open the Printer front door. Open the lock (1). Pull out the sheet distributor on thetelescopic rails (handle, 2). Remove the paper dust with a vacuumcleaner. Remove the pressure plate of the backprinter after unscrewing the knurled screws(3). Clean the pressure plate with a damp clothor AgfaPhoto Cleaner (see Cleaningsubstances at the end of this chapter). Insert the pressure plate again and fix it withthe knurled screws (3). Clean the transport rollers with a damp lintfreecloth. Push in the sheet distributor and close thelocking levers.82G_SD110AgfaPhoto 2005-05-01 / PN 04092_01 8-27

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!