d-lab.2, d-lab.2plus, netlab.2plus - D-Lab 1

Settings and Configurationsd-lab.2, d-lab.2plus, netlab.2plus: Operation4.8.3.3 Film Mask: File Print If the screen Combiprint orderconfiguration was called up with New:press Config. type and select Combiprint.The Film type file print is fixed and cannotbe changed. Press PpF (number of prints per frame) andenter the desired value:preset value = 1 (range 0 to 999). Sub-configurations Indexprint, Backprint,Correction, Autosave, Front print: pressthe button and select the respective subconfigurationfrom the list or set to Off. Press Combiprint and select the desiredconfiguration.022_dpkp Activate one of the following options (theoptions exclude each other; if one option isactivated, the previously active optionautomatically becomes inactive):Fit image to paper(presetting) The complete digital imageis printed; if the image has anotheraspect ratio than the paper, a whiteborder remains on two sides.Fill print sizeA center cropping of the digital image isprinted without a border; part of theoriginal image is lost if the digitalimage has another aspect ratio than thepaper.Press Adjust: Shorter side orAdjust: Longer sideThe original image remains the same,the cut length is variable. One side ofthe digital image is adjusted to thepaper width: either shorter side orlonger side. Press Save or Save as and enter the name.4-122 2005-05-01 / PN 04092_01 AgfaPhoto